|
HARDWARE
|
|
|
TRAKIT-15 Vehicle Intelligent data logging. Capture data for detailed
analysis of vehicle activity. Dynamic speed and heading parameters are used in addition to time intervals to record
location records. Transfer data from the vehicle by a direct connection to a computer or TRAKIT Automatic Wireless Proximity Download software. Process data with TRAKIT-ANALYZER for vehicle activity reports or
TRAKIT ROUTE ACCOUNT ANALYSIS
software for detailed stop-by-stop analysis. |
|
|
|
TRAKIT-20VBF Basic real-time tracking of vehicle fleets. Monitor current
activity while recording historical data in the on-board data buffer. Program
parameters and download data over-the-air. |
|
|
|
TRAKIT-20V
TRAKIT intelligent real-time tracking of vehicle fleets. Monitor current activity while recording historical data in
the on-board data buffer. Program vehicle units with operation parameters and download historical data
over-the-air. Optimize system performance using dynamic speed and heading parameters to
specify when and how often location positions are stored or reported. For use on
analog radio, cellular, Passport and Multinet communications systems. |
|
|
|
TRAKIT 20B Base unit connected between analog radio and host
computer. No programming or configuration is required for the TRAKIT-B. Data is formatted for communication on the radio
system. |
|
|
|
TRAKIT-25A
Included are all of the features of the TRAKIT-20. Enhanced capability includes numerous inputs and outputs to
accommodate various sensors and mobile vehicle terminals. For use on analog radio, cellular, Passport and
Multinet communications systems. |
|
|
|
TRAKIT-25D
For use on digital communications systems. All of the TRAKIT intelligent AVL features are included for use on
digital communications infrastructures. For use on EDACS, CDPD, OpenSky, and APCO-25 communications
systems. |
|
|
|
TRAKIT-VT
Add messaging to your TRAKIT AVL system. The TRAKIT VEHICLE TERMINAL connects directly to a
TRAKIT-25A or TRAKIT-25D
vehicle unit. Text messages are created at the dispatch base with the TRAKIT-USA software and sent to the TRAKIT-VT.
The driver responds from a selection of 8 user-programmed, canned messages to the dispatch base. Use the TRAKIT-VT to
monitor the status of vehicles in the fleet. |
|
|
|
TRAKIT-IP
This device connects between the TRAKIT-20B base unit and a static IP (Internet Provider). The data is communicated
over the internet with any authorized workstation. This capability allows for remote dispatching and monitoring of
vehicles in a local radio system. Multiple radio AVL systems located in separate regions can be monitored
simultaneously by one workstation. |
|
|
|
TRAKIT
Nationwide Vehicle Unit This GPRS transceiver unit is installed in the
vehicle. Included are the GPRS and GPS antennas. The power wires are connected to a constant power source. The
stop sensor wire is connected to the ignition or other 12 volt sensor for indication of stops for
STOP ANALYSIS. |
|
|
|
TRAKIT
Nationwide Emergency/Status Box This is a separate device that connects to the
TRAKIT
NATIONWIDE VEHICLE UNIT. When the button is pressed an alert is transmitted through the
TRAKIT NATIONWIDE MOBILE
MANAGER system to standard email addresses and directly to SMS (Short Message System) capable cellular
phones. The Driver-Call light included on the BOX can be turned on and off from the dispatch center using the
TRAKIT
NATIONWIDE WEB-CLIENT software. |
|
|
SOFTWARE
|
|
|
TRAKIT USA
Monitor activity of an entire fleet of vehicles. Use multiple screens and table displays for easy reference.
Features include zone alerts, and map landmarks. Exclusive Point & Click data feature is an on-line graphical,
maintainable database. Capture all fleet activity real-time into data files for analysis by
TRAKIT-ANALYZER.
Network Versions:
TRAKIT-USA N5, 5 Seat Network
TRAKIT-USA N10, 10 Seat Network |
|
|
|
TRAKIT-II
Version of TRAKIT-USA with the ability to overlay or substitute maps from ESRI shape (Archview) or
mid/mif (Mapinfo) sources. Once in a WGS84 and geodedic lat/long format they become a full-function backdrop for TRAKIT
vehicle monitoring.
Network Versions:
TRAKIT-II N5, 5 Seat Network
TRAKIT-II N10, 10 Seat Network |
|
|
|
TRAKIT FleetSync
Version of TRAKIT-USA incorporating Kenwood FleetSync messaging. Use the FleetSync status and text messaging
window to send messages to one radio, a fleet of radios or broadcast to all radios on the system. |
|
|
|
TRAKIT Supervisor
Monitor This software is installed in a laptop computer in the
vehicle. The fleet supervisor sees where he is as well as where the other fleet vehicles are. |
|
|
|
TRAKIT
Analyzer Perform analysis of vehicle activity from data captured from
the TRAKIT system. Graphs provide an at-a-glance depiction of vehicle activity. Reports show the actual route taken by
a vehicle complete with time stamps of recorded locations. Location listings include physical addresses for each
location. |
|
|
|
| Sample Report 1 |
Specifications: |
| Sample Report 2 |
Brochure |
|
TRAKIT Route Account Analysis
Analyze vehicle activity by stop locations. Stops are geo-referenced in the system. Each time the vehicle visits
one of the new registered locations the arrival time, departure time and durations are
recorded and captured. |
|
|
|
TRAKIT Nationwide Web-Client
National-scope fleet management from any computer. No internet browser is used. The web-client software module
connects automatically to the GLOBAL TRAKIT DATA CENTER on any computer with internet access. View the last-reported
locations of multiple vehicles on the same digital map. Customize the map with landmarks and labels. Maintain an
interactive database with the exclusive Point & Click Data feature. Request
locations on vehicles to know where they are "right now". Create and print reports on the locations
of your entire fleet. Create and print reports on historical activity of vehicles over any time range.
TRAKIT STOP ANALYSIS gives detailed stop-by-stop analysis of not only vehicle activity but also activity by stop. |
|
|
|
TRAKIT
RF/IP Web-Client
Monitor and direct the activity of vehicles in a local radio system from a remote location. Location data is transmitted
from the vehicles to an unattended local radio base station and is relayed via the
TRAKIT-IP device to the GLOBAL TRAKIT DATA
CENTER. View the last-reported location of
multiple vehicles on the same digital map. Customize the
map with landmarks and labels. Maintain an interactive database with the
exclusive Point & Click Data feature. Request locations of vehicles to know where they are "right
now". Create and print reports on historical activity of vehicles over any time range.
TRAKIT STOP ANALYSIS gives
detailed stop-by-stop analysis of not only vehicle activity but also activity by stop. |
|
| Other Software
Modules |
TRAKIT Schedule Adherence
Module for automatic monitoring of vehicles on a timed route, for example
bus routes.
TRAKIT Auto-Proximity Download
Automatically, sequentially download location data from
vehicles equipped with Trakit-15 for processing by TRAKIT-ANALYZER or TRAKIT ROUTE ACCOUNT
ANALYSIS.
TRAKIT IPMobileNet Utilizes the embedded GPS receivers in IPMobileNet radios to provide real-time vehicle tracking.
TRAKIT Multi-Port Allows AVL application to control up to 8 TRAKIT base modems
simultaneously for centralized dispatching from multiple radio regions.
TRAKIT-SQL Interface TRAKIT AVL to computer systems with SQL databases.
Network 10 seat version |
|
| General Packet Radio Service
|
|
TRAKIT Nationwide
Monitor and manage the activity of your entire fleet anywhere in the United
States. Use a standard internet browser or TRAKIT Nationwide Web-Client
software to view locations and generate activity and stop analysis
reports. |
|
Hardware
|
|
|
TRAKIT
Nationwide Vehicle Unit The all-in-one GPS receiver and
GPRS transceiver unit requires only the magnetic GPS antenna to be
placed with an eye-on-the-sky and be connected to a 12V power source, and
it's ready! With one additional wire connection you have all the benefits
of Stop Analysis. |
|
|
|
TRAKIT Nationwide
Emergency/Status Box Accessory box for TRAKIT Nationwide vehicle
unit including emergency/status button and driver call light. |
|
| Software
|
|
|
TN Web
Client Installed into any computer that has internet access,
the TN Web-Client is used to view the last reported locations of all of
the vehicles in the fleet at one time. Included is the landmarks and label
"Point & Click Database" feature to maintain data elements
on-screen. The current location of any vehicle can be requested. Activity
reports and detailed Stop Analysis reports can be requested. The TN
Web-Client also contains the Alerts Maintenance utility for customizing
the emergency/status alert feature. |
|
|
